Performance of canola methyl ester biofuel in a partial swirl spray flame combustor
J. A. Erazo Jr., S. R. Gollahalli And R. N. Parthasarathy
September 2010
Biodiesel is an emerging alternative fuel with practical applicability for use in diesel engines, gas turbines and industrial continuous combustors. Biodiesel is renewable, carbon-neutral from an environment standpoint and sulfur-free. But one drawback ...
|
Water use in dry grind ethanol production
Paul R. Young
September 2010
Water is important to most ethanol producers, but to some it is critical. Comparing water requirements with available water is important in designing a plant, and deciding where to build it.
This paper discusses examples of successful water ...
|
Sherborne Sensors Debuts SS4000M Ultra Miniature Load Cell Series
September 2010
Sherborne Sensors, an ISO9001:2008 and AS9100B certified global leader in the design, development and manufacture of inclinometers, accelerometers, force transducers, load cells, rotary encoders, instrumentation ...
|
New Novozymes enzyme increases yields in ethanol production
September 2010
Novozymes, a producer of biofuel enzymes, launched a new enzyme that makes it possible to produce more ethanol from the same amount of corn. The product, Spirizyme Excel, converts more starch in corn, wheat and ...
|
Waste oil-fired boilers from Columbia Boilers
September 2010
Columbia Boilers waste oil-fired boiler line services a diverse range of commercial and industrial applications, including biodiesel production. Waste oil-fired boilers can burn spec and off-spec biodiesel ...
|
CF Nielsen briquetters from Briquetting Systems
September 2010
Briquetting systems are available from capacities as low as 500 lbs/hour, where the plants can be localized to the fuel consumption markets, to 100,000 ton +/year plants, due to its modular systems.
Briquetter ...
|
New ultra-low NOx burner introduced
September 2010
Hamworthy Peabody Combustion Inc. released the new ECOjet burner, offering ultra-low emissions with little or no flue gas recirculation. Every aspect of the burner, from air entry to gas and oil nozzles ...
|
Conserve water with Niagara air cooler
September 2010
Niagara designs and manufactures Wet Surface Air Cooler closed-loop, evaporative coolers and condensers as a cost-effective technology for both heat transfer and water conservation. Used in a wide variety ...
|
New mobile drying unit from Baker-Rullman Mfg. Inc.
September 2010
Baker-Rullman Mfg. Inc., a manufacturer of corrugated steel storage bins, hoppers, steel structure and triple-pass rotary drum dryers, has completed construction and testing of a mobile drying unit. The Model ...
|
BinMaster SHT-120/140 High Temp Vibrating Rods for high process temperatures
September 2010
The BinMaster SHT or Super High Temperature vibrating rod features a newly developed piezo system built specifically for higher process temperatures up to 482°F (250°C). The SHT is extremely durable due ...
|
Baghouse Filter Leak Analyzer for Airlanco E-86 Filters offer efficiency and flexibility
September 2010
Airlanco E-86 Series Cartridge Filters offer high filtration efficiencies in compact housings. The 8.6” diameter spun-bonded polyester filter cartridges, for which the E-86 is named, are washable and easy ...
|
Mettler Toledo releases new dual-ended-beam weigh module for general-purpose weighing
September 2010
Mettler Toledo introduced the new SWD440 dual-ended-beam weigh module. The SWD440 weigh modules offer good value for general-purpose weighing of tanks, hoppers and OEM machinery. They use dual-ended-beam load cells ...
|
New Centroload™ Feeder from Jeffrey Rader offers uniform feeding
September 2010
The latest in feeding technology from Jeffrey Rader Corp. is the Centroload Feeder. This product is used in the aggregate industry for feeding cone crushers and Vertical Shaft Impactors (VSI) evenly around the circumference ...
|
i-MAG Plate Rare Earth Magnetic Plate Separators
September 2010
Innovative Magnetic Technologies Inc. is a designer and manufacturer of Permanent Magnetic Solutions for the biomass industry. IMT offers processors a variety of magnetic solutions to tramp metal issues that create ...
|
Komax Klean Wall Jacketed Heat Exchanger
September 2010
Komax released its patented Klean Wall Heat Exchanger, which uses High-Pass technology to ensure the passage of large debris (up to 50 percent of pipe ID) and to keep digester sludge moving turbulently through the ...
|
OriginOil announces Hydrogen Harvester Invention
September 2010
OriginOil Inc. announced a new invention that generates hydrogen from living algae, providing an additional energy source from bioreactors. In contrast to previously reported developments in the area, the new ...
|
Flame 100 Safety Bunsen Burner
September 2010
WLD-TEC introduced the Flame 100 Safety Burner, a safe alternative for all traditional Bunsen or alcohol burner applications.
The Flame 100 is suited for all flame related applications in the laboratory. ...
|
Sierra announces 2-year warranty coverage for flow switches
September 2010
Sierra Instruments announced it will offer a 2-year warranty for its entire line of Innova-Switch Flow Level Switches.
Sierra’s Innova-Switch is designed to meet a broad range of performance ...
|
Avery Weigh-Tronix Remote Display Series offers 8- and 12-character models
September 2010
Avery Weigh-Tronix Inc. introduced the XR 8M and XR 12M, the latest additions to the company’s XR Series of bright-red LED remote displays — designed to convey weight, time/date and other key data in ...
|
Victaulic unveils coupling for fiberglass-reinforced plastic pipe
September 2010
Victaulic, a manufacturer of mechanical pipe joining systems, introduced the Style 296A coupling for fiberglass-reinforced plastic (FRP) pipe. The coupling offers more efficient installation than the alternative ...
|
Kimberly-Clark adds new contemporary designs in protective eyewear
September 2010
Kimberly-Clark Professional’s Jackson Safety brand is introducing two new additions to its trusted Smith & Wesson line of protective eyewear – the 44 Magnum and the Aviator.
The ...
|
Imperial Systems Inc. Abort Gates an important part of duct spark, leak detection system
September 2010
An abort gate can be located prior to the inlet of a dust collection system to prevent a flame or burning ember from entering the dust collection system. This method is used if extinguishment from your spark detection equipment is not adequate or ...
|
Emerson introduces new Ovation Ethernet Link Controller I/O Module
September 2010
Emerson Process Management announced the introduction of the Ovation Ethernet Link Controller I/O Module. This flexible, redundant module offers I/O-level Ethernet interface capability that is tightly coupled ...
|
Fixed, portable samplers designed for wastewater treatment, compliance monitoring, process reliability applications
September 2010
Endress+Hauser released its line of water sampling solutions to monitor influent and effluent at water/wastewater treatment plants and in industrial process water applications. Other applications include municipal, ...
|
Emerson enhances Ovation expert control system for improved operator experience, productivity
September 2010
Emerson Process Management released the latest version of its industry-leading Ovation expert control system, widely used to control power generation and water/wastewater treatment facilities around the ...
|
Neptune Chemical Pump releases new metering pumps
September 2010
Neptune Chemical Pump Co. released its Series 500 Metering Pumps. The Neptune Series 500 pumps feature a Variable Oil By-pass stroke adjustment that enables better valve performance than traditional variable-linkage ...
|
Dionex releases global water analysis brochure
September 2010
Dionex released its Water Analysis for a Global Market brochure, which provides an overview of the issues surrounding water quality, global supply, contaminants, emerging concerns, ion analysis and system ...
|
Biofuels producers comply with Clean Water Act, monitor oil/grease discharge levels
September 2010
While ethanol and biodiesel plants are relatively new to the industrial community, they need to comply with operating permits and be able to respond to potential violations. This requires biofuels producers to monitor waste byproducts more closely ...
|
HOBO Conductivity Loggers from Onset
September 2010
The HOBO U24 Conductivity Logger is a high-accuracy, cost-effective data logger for measuring conductivity and temperature in streams, lakes and other freshwater sources. Designed to monitor aquifers for saltwater ...
|
Carbon Sciences files patent application for CO2-based gas-to-liquids fuel technology
August 2010
Carbon Sciences Inc. filed the first of a series of patent applications for its highly scalable clean-tech CO2 based gas-to-liquids fuel technology for transforming a combination of natural gas ...
|
BinMaster introduces MVL Multi-Scanner System for large silos
August 2010
BinMaster Level Controls introduced the MVL multiple scanner system that integrates multiple point measurement data from two 3-DLevelScanners to cover a wide surface area and provide better inventory accuracy ...
|
Replacement nozzles from Powerhouse Technology
August 2010
Powerhouse Technology produces replacement nozzles for all major circulating fluidized bed boiler designs. The company also can customize the air hole patterns and nozzle sizes to adapt to a specific application ...
|
Integrate Material Handling with Keith Walking Floor Technology
August 2010
Keith Walking Floor systems are integrated into material handling systems as receiving, storage and metering bins. The Keith DrivOn bin is designed to facilitate the delivery of material directly into ...
|
Di Più Brik Series fuel puck presses
August 2010
Briquettes and fuel pucks are an easy alternative to pellets, since they are less capital intensive, have lower operational costs and higher densification of the biomass. Di Più Srl has 30 years of experience ...
|
Small line process flowmeter delivers big advantages in demanding applications
August 2010
Process and plant engineers will find the ST98L In-Line Mass Flowmeter from Fluid Components International a reliable flow measurement solution for virtually any air or gas mixture in small process line ...
|
|